Issues (Google Code Archive)
Please find here a read-only access to the old Google Code bug tracker with all attachments.
- Issue #001 [Verified/closed] - pins do not show in/out (high/low) on index.html
- Issue #002 [Fixed/closed] - Improvement proposal
- Issue #003 [Fixed/closed] - [JavaScript] Getters function
- Issue #004 [Fixed/closed] - [Server] Config file
- Issue #005 [Fixed/closed] - UART Support
- Issue #006 [Fixed/closed] - I2C Support
- Issue #007 [Fixed/closed] - SPI Support
- Issue #008 [Accepted/open] - GPIO interrupt handling
- Issue #009 [Accepted/open] - Add WebSocket support
- Issue #010 [Fixed/closed] - Safari Mobile Bug
- Issue #011 [Fixed/closed] - Add OneWire support (Patch attached)
- Issue #012 [WontFix/closed] - Timer
- Issue #013 [Done/closed] - Documentation typo
- Issue #014 [Fixed/closed] - Improvement proposal to determine raspi board revision remotely
- Issue #015 [WontFix/closed] - Installation Problem: Python development headers
- Issue #016 [WontFix/closed] - Add support for checkbox/radiobutton
- Issue #017 [Done/closed] - Enhancement proposal for server module example and usage
- Issue #018 [WontFix/closed] - Error handling when building (Fedora 17)
- Issue #019 [Accepted/open] - Task scheduling
- Issue #020 [Fixed/closed] - Error serving binary file
- Issue #021 [Fixed/closed] - Potential install hickup with Raspbian 2012-12-16
- Issue #022 [Duplicate/closed] - UnicodeDecodeError when page is loaded
- Issue #023 [Duplicate/closed] - Add Counter
- Issue #024 [Fixed/closed] - Celsius and not Celcius
- Issue #025 [Fixed/closed] - Some potential errors from PyDev code checker
- Issue #026 [Duplicate/closed] - Cannot start with no access to DNS
- Issue #027 [Fixed/closed] - sensor.py One Wire Temps below 10000 (5 chars) do not work
- Issue #028 [WontFix/closed] - clients.py enhancement
- Issue #029 [WontFix/closed] - Cannot access WebIOPi over wifi
- Issue #030 [WontFix/closed] - Webiopi install issue
- Issue #031 [Fixed/closed] - Cookie OK Chrome Extension bug
- Issue #032 [WontFix/closed] - installation issue with raspian wheezy 2013-02-09-wheezy-raspbian
- Issue #033 [Fixed/closed] - Wildcards in Config options
- Issue #034 [Accepted/open] - Easier setting up of multiple (digital) ports via config parameter for complex chips
- Issue #035 [Fixed/closed] - Service starts too early and doesn't work right
- Issue #036 [Fixed/closed] - WebIOPi Stops responding after several hours
- Issue #037 [Accepted/open] - Linux Arch support
- Issue #038 [Invalid/closed] - OUT/IN - change GPIO direction
- Issue #039 [WontFix/closed] - Google Analytics not disabled by default
- Issue #040 [Accepted/open] - Improve HTTP request handling
- Issue #041 [Accepted/open] - Create debian packages
- Issue #042 [Accepted/open] - Improve software PWM to use DMA instead of Threads
- Issue #043 [WontFix/closed] - enable CORS support or JSONP support for REST API
- Issue #044 [Accepted/open] - Java (partly Python) client improvement possibilities
- Issue #045 [WontFix/closed] - CoAP server launched even if disabled when using a custom config file
- Issue #046 [Fixed/closed] - Allows Python Client library to be run outside Pi
- Issue #047 [WontFix/closed] - Provided custom html code doesn't work
- Issue #048 [Fixed/closed] - Make the default reference Voltage for ADC´s configurable in the config file.
- Issue #049 [Fixed/closed] - Serial Monitor Input Field not updating - solution included
- Issue #050 [Duplicate/closed] - CORS support
- Issue #051 [Fixed/closed] - Luminosity python http api bug
- Issue #052 [Fixed/closed] - Macros not mapped when using -s command switch
- Issue #053 [WontFix/closed] - Javascript error in Opera
- Issue #054 [WontFix/closed] - Remove Google Analytics tracking
- Issue #055 [Invalid/closed] - Most of the commands on the wiki will not work
- Issue #056 [Fixed/closed] - IPv6 does not work
- Issue #057 [Accepted/open] - Make macros more RESTful
- Issue #058 [WontFix/closed] - Dpkg: error :parsing file /var/lib/dpkg/available near line 0: EOF after field name E:sub process/user/bin/dpkg returned error code (2)
- Issue #059 [WontFix/closed] - Why not a test platform
- Issue #060 [WontFix/closed] - adding a delay before sending commands to serial port
- Issue #061 [WontFix/closed] - Can't import MySQLdb into script.py
- Issue #062 [Accepted/open] - Update wiki for missing Serial docs
- Issue #063 [WontFix/closed] - Add description for wiringPi pinout
- Issue #064 [Fixed/closed] - Override str() methods in drivers
- Issue #065 [Accepted/open] - Missing function on GPIOPort expander driver
- Issue #066 [WontFix/closed] - DS18B20 - Exception thrown in python and webpage
- Issue #067 [WontFix/closed] - Set GPIO value - not working
- Issue #068 [Fixed/closed] - Temperature Exception when 1-Wire returns None
- Issue #069 [Fixed/closed] - Add option to change Authentication REALM
- Issue #070 [Accepted/open] - Add synchronization/lock to drivers functions call
- Issue #071 [Accepted/open] - Allows Reverse Proxying / custom URL root
- Issue #072 [WontFix/closed] - jQuery mobile not loaded on Tablets
- Issue #073 [Fixed/closed] - Improve touch event on mobile and tablet
- Issue #074 [Accepted/open] - GPIO Expander Port Write REST Error
- Issue #075 [WontFix/closed] - spi.xfer() uses bytes() call w/o encoding parameter which raises an error in Python 3
- Issue #076 [Fixed/closed] - Add client informations in HTTP/CoAP logs
- Issue #077 [WontFix/closed] - Address already in use
- Issue #078 [WontFix/closed] - Startup Problem While True
- Issue #079 [Duplicate/closed] - Serial client library not working on Firefox
- Issue #080 [Accepted/open] - Add Exception handling
- Issue #081 [New/open] - Problems in normal Startup but not in the Debug mode
- Issue #082 [New/open] - Integration of DHT11 Humidity sensors
- Issue #083 [Fixed/closed] - Complete Content-Length HTTP header for responses
- Issue #084 [Accepted/open] - Add logout option
- Issue #085 [Duplicate/closed] - Need an option to force userid/password every time
- Issue #086 [New/open] - Custard Pi Interface
- Issue #087 [New/open] - Some results miss "Content-Type" header
- Issue #088 [WontFix/closed] - Can I use WebIOPi as a front-end to control scripts that DO NOT use GPIO
- Issue #089 [New/open] - Add exception details to http 500 error
- Issue #090 [New/open] - TSL2561 sensor lux value not changing
- Issue #091 [New/open] - New Device: BMP180
- Issue #092 [New/open] - Support for HTU21D
- Issue #093 [New/open] - Can't run basis tutorial
- Issue #094 [New/open] - Add DAC reference gain support
- Issue #095 [New/open] - New driver for DS2413 added and updated version of DS2408 driver available
- Issue #096 [New/open] - Agree on delivered values when reading an GPIO output channel
- Issue #097 [New/open] - AttributeError: ‘module’ object has no attribute ‘GPIO’
- Issue #098 [New/open] - Auto start at boot
- Issue #099 [New/open] - Module MCP4725 Not Implemented
- Issue #100 [New/open] - Patch for percent-encoded URL's
- Issue #101 [New/open] - GPIO PinNumbering versus signalnames in single column view is incorrect
- Issue #102 [New/open] - Adafruit_CharLCDPlate
- Issue #103 [New/open] - Driver for PCA9698 available
- Issue #104 [New/open] - Driver for PCA9530 available
- Issue #105 [New/open] - Patch for 1-wire device lookup for multi-master/multi-channel (e.g. DS2482-x)
- Issue #106 [New/open] - How to setup the automatic kernel driver loading for the DS2482-x family
- Issue #107 [New/open] - Java: GPIO digitalWrite and digitalRead return not 1 but 1/n instead, so check fails
- Issue #108 [New/open] - LM35 interface with Webiopi
- Issue #109 [Done/closed] - [Errno 98] Address already in use with webiopi 0.7.0
- Issue #110 [New/open] - Call 2 Macros from a webiopi().createGPIOButton
- Issue #111 [New/open] - Servo control
- Issue #112 [New/open] - Bug in PiFaceDigital driver preventing use of board parameter via config
- Issue #113 [New/open] - Support for MCP3422
- Issue #114 [New/open] - support for RS485 Comunication
- Issue #115 [New/open] - Missing device name info in webiopi.js for PiFaceDigital
- Issue #116 [New/open] - Drivers for RTC chips DS1307, DS1337, DS1338, DS3231 and MCP7940 available
- Issue #117 [New/open] - Page refresh timeout option configuration
- Issue #118 [Invalid/closed] - while i am running my script i am getting following error:
- Issue #119 [New/open] - while i am running my script i am getting following error:WebIOPi-ERROR-EOF read where not expected
- Issue #120 [New/open] - can not use logging to the file together with webiopi
- Issue #121 [New/open] - webiopi not install in pidora
- Issue #122 [New/open] - Drivers for PCA9555 and PCA9535 available
- Issue #123 [New/open] - Python client basic authentication broken for Python 3
- Issue #124 [WontFix/closed] - Framework tutorial not running correctly
- Issue #125 [New/open] - Adding a Picture
- Issue #126 [New/open] - Consider adding RPi B+ support (extra GPIOs and reflection of those on panel)
- Issue #127 [New/open] - webiopi serial monitor not detecting arduino uno
- Issue #128 [New/open] - Driver for Custard PI - MCP 4822 and 3202 drivers
- Issue #129 [New/open] - Can't use REST Api after changing username and password
- Issue #130 [New/open] - NameError: global name 'GPIO' is not defined
- Issue #131 [New/open] - Adding are DAC4725
- Issue #132 [New/open] - Drivers for EEPROM chips with 16 bit addressing (24c...) available
- Issue #133 [New/open] - Automatic pump switch with dependancies
- Issue #134 [New/open] - ERROR - global name 'GPIO' is not defined
- Issue #135 [New/open] - Adafruit MCP9808 Temperature Sensor
- Issue #136 [New/open] - PiFaceDigital driver has missing close() method
- Issue #137 [New/open] - Dont work on Raspberry 2
- Issue #138 [New/open] - Unable to grab Webiopi or to communicate the problem.
- Issue #139 [Duplicate/closed] - WebIOPi not working on Raspberry Pi 2
- Issue #140 [New/open] - NameError: global name 'GPIO' is not defined
- Issue #141 [WontFix/closed] - Customzed HTML file is not loading
- Issue #142 [New/open] - DAC MCP4921
- Issue #143 [New/open] - error 403
- Issue #144 [New/open] - Google Analytics enabled, not to be disabled (easily), not shown in documentation
- Issue #145 [WontFix/closed] - ~
- Issue #146 [Invalid/closed] - WebiOpi Tutorial_Basis don´t work for me
- Issue #147 [New/open] - rpi.gpio not working after installing webiopi
- Issue #148 [New/open] - Saving matplotlib figure
- Issue #149 [Duplicate/closed] - Webiopi is not working on Raspberry 2
- Issue #150 [New/open] - POST set function to PWM not working
- Issue #151 [Duplicate/closed] - Cannot install Webiopi on RPi 2
- Issue #152 [WontFix/closed] - Apache
- Issue #153 [Duplicate/closed] - I cannot see all of the 40 raspberry pi pins on the Webiopi
- Issue #154 [New/open] - gpio boxes greyedout
- Issue #155 [New/open] - ds2482 w1_bus_master2
- Issue #156 [New/open] - Nothing happens when i press the buttons on the default configuration
- Issue #157 [New/open] - Cascade GPIO expander (74HC595)
- Issue #158 [New/open] - Cannot download off of the SourceForge website
- Issue #159 [New/open] - TypeError when using MCP4921 or MCP4922
- Issue #160 [New/open] - List of Commands ,e.x webiopi.sleep()
- Issue #161 [New/open] - WebIOPi.createButton(id, label[, mousedown[, mouseup]]) not functioning